Razer kraken x support

Описание и возможности

Сразу скажем, что, по сути, Razer Synapse является облачным сервером с возможностью сохранять профили пользователей с теми или иными настройками. При этом количество профилей от одного пользователя может быть достаточно большим. Среди особенностей программного обеспечения можно выделить такие:

• Создание и хранение профилей для такого оборудования, как Razer.
• Переназначение главных и дополнительных кнопок мышки.
• Настройка режима ускорения, чувствительности, подсветки и других параметров мышки.
• Возможность создания макросов.
• Быстрое переключение между сохраненными профилями.
• Автоматическое обнаружение подключенных устройств.

Troubleshooting

How do I clean my Razer Kraken Pro V2?

We can’t say for sure what kind of dirt and dirt might be on your product, or how certain cleaning products react with it, but we’re lucky to clean Razer products using publicly available monitor cleaning wipes.

• To clean the body of your Razer headset, wipe gently using a monitor wipe.
• Do not rub the surface of your Razer headset.
• When cleaning earpads, make sure the earplugs and speakers are not wet, as they may cause damage to your headset.

I hear echoes or feedback when using my Razer Kraken Pro V2. How can I solve this problem?

Here are some helpful suggestions:

• Make sure that “Listen to this device” is NOT selected under Control Panel => Sound => Recording => Properties => Listen
• Make sure that your sensitivity level is not set to max or pushed too much under Control Panel => Sound => Recording => Properties => Levels
• Only one voice chat app is used while in the game and Check if you are configured to use the right microphone under Control Panel => Sound => Recording => Select Proper Microphone => Default Device Set and Communication Device.
• Check your computer supports for audio jack and use the included audio cable and mic splitter.

Device Support

Keyboards

Mouse

Misc

Determining the Device ID

Razer’s devices use a VID (Vendor ID) of . You can identify the USB PID (Product ID) by typing:

This will output something similar to this:

No device found

Those of you on Ubuntu 16.10, some of you on 16.04 and at least some arch users might notice that even though your device is listed as supported it doesnt appear on any of the supporting applications. Udev is not playing ball. Look at comment and run it. Am currently working on a little service that should bind devices and set up the permissions like udev would.

I’ve created a daemon that lives in userspace which allows one to easily interact with the driver. It abstracts away some of the logic and also (will eventually) allow you to build
custom effects, though it does do mulitcoloured ripples :). As every device is slightly different I’ve maintained a mapping between devices supported by the driver and devices supported
by the daemon. If your device is supported by the driver but not by the daemon then raise an issue.

Достоинства и недостатки

Обзор будет более полным, если рассмотреть главные плюсы и минусы программного обеспечения.

Достоинства:

• Стильный интерфейс на русском языке.
• Быстрая и простая инсталляция.
• Бесплатное использование.
• Возможность гибко настроить мышь, клавиатуру, наушники и другие подключенные устройства.
• Можно добавить неограниченное количество профилей с конфигурацией.
• При желании утилиту можно полностью удалить с компьютера без вреда для системы.
• Отзывы о приложении преимущественно положительные.
• Совместимость с Windows, MacOS и Linux.

Недостатки:

• Не всегда видит нужные устройства, требуются драйвера.
• Работает только с девайсами от Razer.

Как пользоваться

Покончив с теоретической частью обзора, будем переходить уже к практике и разбираться, как загрузить желаемый контент на свое устройство для дальнейшего пользования.

Загрузка и установка

Никаких особых знаний и умений для инсталляции утилиты не потребуется. Читаем пошаговую инструкцию и выполняем пункт за пунктом:

1. Внизу этого материала находим ссылку в виде кнопки, перейдя по которой загружаем архив с файлами программы. Распаковываем архив с помощью пароля, прописанного в табличке, и запускаем установку, воспользовавшись установочным файлом.

1. В открывшемся окошке кликаем по «УСТАНОВИТЬ».

1. Пропускаем инсталляцию дополнительного программного обеспечения, кликнув по кнопке, обозначенной на скриншоте красным маркером.

1. Ждем окончания процесса инсталляции. Он, как правило, не занимает много времени.

1. Для начала работы с программой кликаем по кнопке «ПРИСТУПИТЬ К РАБОТЕ».

С использованием приложения сможет разобраться даже новичок, не имеющий знаний в сфере компьютеров. Этому способствует очень удобный русскоязычный интерфейс.

Инструкция по работе

Важно понимать, что обозреваемое приложение используется на ПК или ноутбуке для настройки клавиатур, мышек, наушников и прочих девайсов от Razer, например, Razer Cynosa Pro Bundle. После скачивания и установки софта он в автоматическом режиме находит все поддерживаемые устройства

Выбрав тот или иной девайс, вы можете настроить его конфигурацию и сохранить профиль. Данное ПО позволяет хранить большой набор таких настроек и быстро переключаться между ними.

Common Questions

What is the audio system used by the Razer Kraken Ultimate?

The Razer Kraken Ultimate features THX Spatial Audio for positionally-accurate sound through Razer Synapse 3. The THX button on the back of the left earcup can be used to toggle THX Spatial Audio on or off. The white LED indicator lights up when THX Spatial Audio is enabled.

What kind of mic does the Razer Kraken Ultimate feature?

The Razer Kraken Ultimate comes with an active noise-canceling microphone, effectively cutting out background noise for crystal-clear team communication.

What type of earcup cushions does the Razer Kraken Ultimate come with?

The Razer Kraken Ultimate uses oval ear cushions designed for full-ear coverage with cooling gel, for sound isolation and comfort.

Press the mic button on the mic itself to turn the mic on or off. The mic is off when the red LED indicator is lit.

How do I clean my Razer Kraken Ultimate headset?

We cannot say with certainty what type of dirt and debris may be on your product, or how certain cleaning products may react with it, but we have had good luck cleaning Razer products using commonly available monitor cleaning wipes. To clean the body of your Razer headset, take a monitor wipe and use gentle wiping motions. Do not scrub the surface of your Razer headset.
When cleaning the earpads on your headset, take extra care to not get any liquids inside the earcup and onto the speaker itself, as this may damage your headset.

Troubleshooting

I hear echo/feedback when using my Razer Kraken X. How can I fix this?

Please try the recommendations below:

1. Be sure that the microphone is fully extended when in use. If the mic is in the stored position, it will pick up sounds from the earcup.

2. Ensure that «Listen to this device» is NOT selected under Control Panel >Sound > Recording > Properties > Listen.

3. Check the microphone levels at Control Panel >Sound > Recording > Properties > Levels and adjust accordingly.

4. Ensure that only one voice chat application is in use while in-game.

5. Check that the PC is configured to use the correct recording device under Control Panel > Sound > Recording. Select the proper recording device, right-click on it, and select «Set Default Device» or «Select Default Communication Device».

6. Ensure the PC supports the combined audio jack. If not, please use the included audio/mic splitter cable.

Here are a few suggestions that may help:

1. Be sure that the microphone is fully extended when in use. If the mic is in the stored position, it will pick up sounds from the earcup.

2. Check that the PC is configured to use the correct recording device under Control Panel > Sound > Recording. Select the proper recording device, right-click on it, and select «Set Default Device» or «Select Default Communication Device».

3. Check the microphone levels at Control Panel >Sound > Recording > Properties > Levels and adjust accordingly.

4. Check that the PC is configured to use the correct recording device under Control Panel > Sound > Recording. Select the proper recording device, right-click on it, and select «Set Default Device» or «Select Default Communication Device».

5. Under Control Panel > Sound > Communications, select «Do Nothing».

6. Under Control Panel > Sound > Recording > Properties > Enhancements, select «Disable all sound effects» or try a combination of enhancements that works for your setup.

7. Under Control Panel > Sound > Recording > Properties > Advanced > Default Format, select «2 channel, 16 bit, 48000Hz (DVD Quality)» if available.

Here are a few tips that should help with this issue:

1. Make sure the mic diaphragm is in front and the air vent is facing away from your mouth.

2. Check that the PC is configured to use the correct recording device under Control Panel > Sound > Recording. Select the proper recording device, right-click on it, and select «Set Default Device» or «Select Default Communication Device».

3. Under Control Panel > Sound > Communications, select «Do Nothing».

4. Under Control Panel > Sound > Recording > Properties > Enhancements, select «Disable all sound effects» or try a combination of enhancements that works for your setup.

5. Under Control Panel > Sound > Recording > Properties > Advanced > Default Format, select «2 channel, 16 bit, 48000Hz (DVD Quality)» if available.

I have no audio when using the Razer Kraken X headset.

Here are a few suggestions that may help:

1. Make sure the in-line volume control is turned up. Rotate the volume wheel on the in-line control to increase the volume.

2. Check that the correct playback device is selected under Control Panel > Sound > Playback. Select the correct device, right-click, and select «Set as Default Device».

3. Check the computer volume levels and make sure it is not muted or turned all the way down.

I cannot hear game audio when using the Razer Kraken X headset on a PS4 or Xbox One.

When using any 3.5mm headset with a gaming console (i.e., PS4, Xbox One, etc.) the game/chat balance or mixer, is controlled by the console. Some controllers have the game/chat mixer and volume controls built-in. In this case, these levels can be modified via the controller. Please refer to console instructions below:

PS4: https://manuals.playstation.net/document/en/ps4/settings/audiodevice.html

Xbox One: https://support.xbox.com/en-US/xbox-one/accessories/connect-compatible-headset

Support

What is an active microphone noise cancellation?

Razer Kraken Pro V2 uses a secondary microphone to record ambient noise, which is then pressed through an intricate algorithm so that only the speaker’s voice can be heard clearly through noisy environments.

Does an active noise silencer mean that all noise in the background is muted?

Active noise cancellation works to reduce as much noise as possible, but not all noise can be muted, We are constantly improving technology to provide you with the best communication capabilities.

Why can’t I turn my active microphone noise silencer on or off in Razer Synapse?

Make sure all voice-enabled apps like Razer Comms, Skype, Discord, in-game chat, and the like are closed before turning on the active microphone silencer.

Where can I find the serial number on my Kraken Pro V2 Headset?

You’ll find the serial number located under the headset’s left earpad. To look carefully at the serial number, remove the earpad foam cover.

Common Questions

How do I connect the Razer Kraken X to my PC?

The Razer Kraken X headset can be used with most devices that have a 3.5mm jack.

For desktop or laptop computers with combined audio jacks, you can simply plug in the Razer Kraken X directly.

For desktop or laptop computers equipped with separate jacks for audio output and microphone input, the included 3.5mm splitter extension cable can be used as in the illustration below:

The serial number can be found on the left earcup as illustrated below:

How do I clean my Razer Kraken X headset?

We cannot say with certainty what type of dirt and debris may be on your product, or how certain cleaning products may react with it, but we have had good luck cleaning Razer products using commonly available monitor cleaning wipes. To clean the body of your Razer headset, please take a monitor wipe and use gentle wiping motions. Do not scrub the surface of your Razer headset. When cleaning the earpads on your headset, take extra care to not get any liquids inside the earcup and onto the speaker itself, as this may damage your headset.

Specifications:

• Frequency response: 12 Hz 28 kHz
• Impedance: 32 @ 1 kHz
• Sensitivity (@ 1 kHz): 118 dB
• Input power: 30 mW (Max)
• Drivers: 50 mm, with Neodymium magnets
• Inner ear cup diameter: 56 mm / 2.2 in
• Connection type: Analog 3.5 mm
• Cable length: 1.3 m / 4.27 ft. plus 2 m / 6.6 ft mic splitter adapter cable
• Approx. weight: 322 g / 0.71 lbs
• Frequency response: 100 Hz 10 kHz
• Signal-to-noise ratio:> 55 dB
• Sensitivity (@ 1 kHz): -38 3 dB
• Pick-up pattern: Unidirectional ECM boom
• In-line control: Analog volume control wheel, Microphone quick mute toggle
• Audio usage: Devices with 3.5 mm audio jack
• Audio + microphone usage: Devices with 3.5 mm audio + mic combined jack

Troubleshooting FAQs

The microphone on the Razer Kraken Ultimate isn’t sensitive enough.

If the microphone on your Razer Kraken Ultimate only picks up your voice when turning up the microphone level to max sensitivity through Windows but it adds static and distorts your voice, follow these few suggestions that may help resolve the issue:

1. Make sure that the mic diaphragm is in front and the air vent is facing away from your mouth.

1. Check if the PC is configured to use the correct recording device under Control Panel > Sound > Recording. Select the proper recording device, right-click on it, and select «Set Default Device» or «Select Default Communication Device».
2. Under Control Panel > Sound > Communications, select «Do Nothing».
3. Under Control Panel > Sound > Recording > Properties > Enhancements, select «Disable all sound effects» or try a combination of enhancements that works for your setup.
4. Under Control Panel > Sound > Recording > Properties > Advanced > Default Format, select «2 channel, 16 bit, 48000Hz (DVD Quality)», if available.

There is no audio when using the Razer Kraken Ultimate headset.

Here are a few suggestions that may help:

1. Make sure that the volume control at the back of the left earcup is turned up. Rotate the volume wheel towards the «+» indicator to increase volume.

1. Check if the correct playback device is selected under Control Panel > Sound > Playback. Select the correct device, right-click, and select «Set as Default Device».
2. Under Control Panel > Sound > Communications, select «Do Nothing».
3. Check the computer volume levels and make sure it is not muted or turned all the way down.